ZenTitan Operations Guide

Product: ZenTitan Function: Asset presence tracker Form Factor: Rugged BLE beacon Battery: Built-in, non-replaceable Wireless Protocol: BLE (iBeacon or Eddystone, depending on configuration) Typical Range: Environment-dependent (line-of-sight recommended)

Written By Support Team

1. What ZenTitan Does

ZenTitan is a wireless presence beacon designed to:

  • Advertise its existence for asset tracking

  • Be detected by compatible BLE gateways (vehicle trackers, cameras, or receivers)

  • Allow the platform to confirm the presence of the asset

Note: ZenTitan tracks presence only (no temperature, humidity, or motion sensors). It is always powered on, has a non-replaceable battery, and does not require any physical interaction to activate.

2. Before You Start

You will need:

  • ZenTitan device

  • Compatible BLE gateway

  • Smartphone with Bluetooth enabled

  • KBeacon Pro app installed (iOS or Android)

Note: No password or activation step is required.

3. Step 1 – Verify Advertising in KBeacon Pro

  1. Open KBeacon Pro and enable Bluetooth on your phone.

  2. Scan for nearby BLE devices.

  3. Locate ZenTitan using its MAC address or label.

  4. Select the device to view details.

Confirm the following:

  • Device is visible and advertising.

  • Battery level is reported (for information only).

  • Device identifier is correct and stable.

4. Step 2 – Add ZenTitan to ZenduOne

4.1 Add as a BLE Beacon

  1. Log in to ZenduOne and navigate to the BLE Beacon or Devices section.

  2. Add a new beacon:

    • Type: BLE Beacon / Asset Tracker

    • Identifier: MAC or serial

  3. Assign to the correct customer/account.

4.2 Link ZenTitan to an Asset

  1. Open the asset profile in ZenduOne that will represent the tracked item.

  2. Add ZenTitan as a linked beacon and save changes.

5. Step 3 – Verify Presence in ZenduOne

  1. Ensure ZenTitan is within BLE range of the gateway.

  2. Open the live or asset view in ZenduOne.

  3. Confirm that ZenTitan is detected and associated with the correct asset.

If ZenTitan does not appear:

  • Confirm the device is visible and advertising in KBeacon Pro.

  • Verify BLE scanning and whitelisting on the gateway.

  • Ensure the beacon is assigned to the correct asset.