How To Enable Hotspot From ZenduONE Portal & Veyes Application

Written By Philip Stanoev

This comprehensive guide provides step-by-step instructions for enabling hotspot functionality on ZenduCAM devices through both ZenduONE Portal and Veyes Application methods. The hotspot feature enables data connection sharing for connectivity solutions and device network access in various deployment scenarios.

Overview

This guide demonstrates the complete process of enabling hotspot functionality for ZenduCAM devices using two distinct methods: ZenduONE Portal configuration and direct device access through Veyes Application. Whether configuring devices for initial setup or troubleshooting connectivity issues, this resource provides systematic instructions for seamless hotspot implementation.

Method 1: ZenduONE Portal Hotspot Configuration

Step-by-Step Portal Configuration Process

  1. Portal Access and Device Selection: Login to ZenduONE Portal and select one of the online cameras from the Map interface, then navigate to Assets Tab and click on device settings.

  2. Required Fields Configuration: Complete the following configuration parameters in the ZenduCAM Settings interface:

    • Device Details: Verify Device Serial number and confirm Tracker Type is set to "ZenduCAM"

    • Select Configuration: Choose "Default" or custom configuration as needed

    • Name Custom Configuration: Enter "Configuration Name" or desired identifier

    • Select Timezone: Configure appropriate timezone (modify from "None" if required)

    • Time Format: Set preferred time format (modify from "None" if required)

    • Day Light Savings: Configure daylight saving time settings as needed

    • Set Delay Time & Recording Time: Configure timing parameters (modify from "None" if required)

    • Speed Measurement: Set measurement units (modify from "None" if required)

  3. Hotspot Activation: Scroll to the bottom of the configuration interface and enable the Hotspot toggle switch.

  4. Encryption Configuration: In the Encryption section, select "WPA" for secure network configuration (note: image shows "None" but WPA is recommended for security).

  5. Network Credentials Setup: Configure custom network identification:

    • Enter Hotspot Name: Input desired network name (example: "HotspotName")

    • Password Configuration: Enter secure password meeting minimum 8-character requirement

  6. Configuration Save: Click "Save Configuration" to apply all hotspot settings and activate functionality.

Method 2: Veyes Application Hotspot Configuration

Prerequisites and Initial Setup

  1. Power Verification: Check if camera is powered on and operational.

  2. SIM Card Verification: Check if SIM card is properly inserted in device.

  3. SIM Installation: If SIM is not present, insert SIM card and repower the camera for proper recognition.

  4. LED Status Monitoring: Wait for Green Power and Green WiFi indicators for ADAS/LITE models or red indicator for ADP models.

  5. WiFi Connection: Connect to device WiFi network (ensure connection to camera identifiers 003F, 00D2, or 00710).

Application Configuration Process

  1. Application Launch: Launch Veyes application on mobile device or computer.

  2. Camera Connection Verification: Confirm successful connection to camera device through application interface.

  3. Authentication: Enter username and password for device access.

  4. Credential Access: For credential information, contact support@zenduit.com or call +1 (855) 936-3848 x 2.

Hotspot Configuration Steps

  1. Preferences Access: Click on Preferences option in application menu.

  2. Network Configuration: Navigate to Network > WiFi settings menu.

  3. Access Point Activation: Enable the AP (Access Point) functionality.

  4. WiFi Mode Selection: Select "2.4G" as WiFi Mode for optimal compatibility.

  5. Hotspot Activation: Turn on the Hotspot feature and save configuration settings.

Configuration Validation

Portal Method Verification

Settings Confirmation: Verify hotspot configuration through ZenduONE Portal interface showing enabled status with proper encryption and network credentials configured.

Application Method Verification

WiFi Settings Confirmation: Confirm hotspot activation through Veyes Application WiFi settings interface with proper AP mode and frequency configuration.

Technical Considerations

Security Configuration

Encryption Options: While "None" encryption creates open networks, WPA encryption provides secure access control for protected hotspot functionality in operational environments.

Network Specifications

Frequency Band: 2.4G WiFi mode provides optimal compatibility and range for hotspot connectivity across various device types and operational scenarios.

Support Resources

Technical Assistance: For hotspot configuration support, connectivity troubleshooting, or credential access requirements, contact support team at support@zenduit.com or +1 (855) 936-3848 x 2 for expert guidance and configuration assistance.

Configuration Requirements: Ensure SIM card is properly installed and device maintains stable power throughout configuration process for successful hotspot implementation.

The hotspot configuration guide provides comprehensive setup procedures for ZenduCAM devices through both portal and application methods, enabling flexible connectivity solutions for diverse operational requirements and mobile device integration scenarios.

For a visual demonstration of this article, please see the reference video below: